The DCX ICP40 is designed to reject heat from a single-tank immersion installation. It combines the pump and fan control in a compact unit that connects to a loop sized for the equipment’s heat load.
Its two fans adjust airflow to demand. The cooler can form part of a heat-recovery project, but the tank, piping and other components must be checked separately: this listing is not for a complete immersion system.
Reference specifications
- Cooling capacity at 35 °C ambient: 40 kW
- Cooling capacity at 25 °C ambient: 45 kW
- Dimensions (width × depth × height): 1400 × 460 × 715 mm
- Fans: 2 × 500 mm
- Noise level: 58–62 dB(A)
- Maximum electrical power consumption: 1.5 kW
- Power supply: 230–240 V, single-phase, 50/60 Hz
- Connections: 1″ / DN25
- Fluid temperature (inlet/outlet): 60 / 40 °C
- Nominal flow rate: 1.7 m³/h
- Pressure drop: 0.34 bar
- Transport weight: 80 kg
Reference values from DCX’s technical table. Cooling capacity is not electrical power consumption: it depends on ambient temperature and loop conditions. Confirm the specifications of the supplied version before sizing the installation.
Before choosing a cooler
Check the equipment’s heat load, compatible fluid, flow rate, connections and electrical supply. Also confirm which components are included in the offer and which the installation needs separately. The stated capacity does not guarantee compatibility with every miner or cooling loop.
Reviews
There are no reviews yet.