Dry cooler DCX 120 kW

The DCX 120 kW dry cooler rejects heat from liquid-cooling loops to the outside air. It is intended for installations with higher heat loads than the compact ICP15 and ICP40 systems.

Three fans move air through the heat exchanger. Performance depends on operating conditions; the rated capacity is not a constant output in every climate. Confirm the pump station and accessories required for your project.

Reference specifications

• Cooling capacity at 35 °C ambient: 120 kW
• Cooling capacity at 25 °C ambient: 140 kW
• Dimensions (width × depth × height): 2400 × 1400 × 500 mm
• Fans: 3 × 500 mm
• Noise level: 58–68 dB(A)
• Maximum electrical power consumption: 2.2 kW
• Power supply: 400 V, three-phase, 50 Hz; or 460 V, three-phase, 60 Hz
• Connections: 2″ / DN50
• Fluid temperature (inlet/outlet): 60 / 40 °C
• Nominal flow rate: 5.2 m³/h
• Pressure drop: 0.39 bar
• Transport weight: 250 kg

Reference values from DCX’s technical table. Cooling capacity is not electrical power consumption: it depends on ambient temperature and loop conditions. Confirm the specifications of the supplied version before sizing the installation.

Before choosing a cooler

Check the equipment’s heat load, compatible fluid, flow rate, connections and electrical supply. Also confirm which components are included in the offer and which the installation needs separately. The stated capacity does not guarantee compatibility with every miner or cooling loop.

Manufacturer reference: DCX 120 kW